LYCO-BRONZE Professional Spray Tan Machine

1. Ask the client to step on the LYCO-BRONZE Sticky Feet to protect the soles of the feet. Also provide a face mask to put on their face while you spray the body.
2. Start to spray on the client’s back. Spray in circular movements 15 – 20cm from the skin. Spray the back of shoulder area first. If product starts to run, you are too close. Stop and gently blend product in by hand or with a sponge over the body. Spray down one side of body and repeat on the other side. Turn client to face you and repeat the process on the front. Ask client to bend elbows and knees when spraying.
3. Lightly spray the back of the hands and the top of the feet with up and down movements. When spraying client’s arm, cover the client’s palm with your gloved hand, to avoid spraying the palm.
4. Spray the face last. Remove client’s face mask, ask the client to close their eyes and hold their breath before you spray the face. Spray their face lightly with up and down movements, while the client slowly moves their head from left to right.

WARNING:

• Before using the machine, make sure the filter has been installed at the bottom of the machine.
• When using the machine do not work longer than 15 minutes at any one time, in order to protect the motor of the machine. The motor has an overheat protector. If the machine overheats, the motor will shut down. Once the temperature is normal, the motor can resume operation. It normally takes 30 minutes for the machine to cool down to normal working temperature.
• Do not cover the air inlet of the machine, except with the filter.
• Do not close the airflow off from the gun. It should have air flowing out all the time. If not, the motor will overheat, or the machine may burn out.

NOTE: Always clean the spray gun as per the instructions after each client, so the tanning solution does not dry in the spray gun and become blocked.